中性或弱酸性体系下锌基水系电池负极材料研究进展

锌具有原料丰富、质量轻便、金属导电性与延展性好以及理论比容量高等优势,可以作为绿色可充电电池的理想电极材料。其中,以中性或弱酸性水溶液为电解质、锌为负极的锌基水系电池具有安全性高、电池材料廉价无毒、制备工艺简单、环境友好等特点,在储能和动力电池领域具有极高的应用价值和发展前景。但电池充放电过程中伴随的锌枝晶、析氢、腐蚀、钝化等问题限制了其实际应用。本文综述了锌基水系电池负极存在的问题及当前的解决策略,并对其负极研究发展方向进行了展望。     

Electrospun Nanofibrous Adsorption Membranes for Wastewater Treatment: Mechanical Strength Enhancement

Functional nanofibrous membranes fabricated by electrospinning technology have attracted much attention in the removal of heavy metal ions from contaminated wastewater. The high specific surface area, high porosity and ease of functionality create an enhanced throughput and high adsorption capacity of the nanofibrous membrane. However, the relatively poor mechanical properties of the membrane with a non-woven nanofibrous structure are one of the major concerns, which can limit the applications in wastewater treatment. Different strategies and methodologies were explored to address the problems and were reviewed in this work, highlighting the possibilities of overcoming the poor mechanical properties of the nanofibrous membrane and to ensure the recyclability and reusability of the membrane during the adsorption process.     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

Highly elastic cobweb-like SiO/CNF composites with reconstructed heterostructure for high-efficient lithium storage

The silicon-based materials are promising candidates for lithium-ion batteries owing to their high energy density. However, achieving long lifespan under realistic conditions remains a challenge because of the volume expansion and low conductivity. In this work, the highly elastic cobweb-like composite materials consisted by SiO and nanofibers are designed and fabricated for high-efficient lithium storage by ball-milling & electrostatic spinning method. The reconstructed heterostructure and highly elastic nanofibers can simultaneously increase the conductivity and inhibit the “expansion effect” of silicon-based materials. The constructed electrode of n-SiO/CNF delivers an initial capacity of 1700 mAh/g, and maintains the capacities over 1000 mAh/g after 100 cycles at the current density of 500 mA/g. Meanwhile, this electrode can give an initial coulombic efficiency over 85% and maintains at 98% in the following charge/discharge processes. Furthermore, it exhibits efficient long-term electrochemical performance, maintaining the capacity at about 1000 mAh/g at a high current density of 1000 mA/g after 1000 cycles. This work could provide a promising strategy for enhancing the performance of silicon-based composite materials for practical application in lithium-ion batteries.     

亚微米电喷雾喷针在非变性质谱分析中的研究进展

非变性质谱技术已成为表征蛋白质结构的重要工具之一。与传统的电喷雾喷针(Electrospray emitter,ESI emitter)相比,亚微米电喷雾喷针具有改变离子电荷态分布和降低盐离子加合等多种特性,可在生理环境下直接解析蛋白质的结构。该文综述了亚微米电喷雾喷针的特性及其在非变性质谱分析中的应用,并对其未来的发展趋势进行了展望。     

Analytical Modelling of Electron-coupled Ion Transfers with Immobilized vs Soluble Redox Transducer at Thick Film-modified Electrodes

Analytical theoretical solutions are deduced for the current-potential response, concentration profiles and interfacial potentials of electron-coupled ion transfers in the cyclic voltammetry with thick film-modified electrodes. The theory covers a wide variety of possible situations, namely, the redox transducer can be either immobilized on the working electrode or freely diffusing in the organic film, and the ion transfer can be either simple or complicated by homogeneous chemical processes. A comparative and comprehensive study of each case is performed, establishing the key parameters that define the behaviour of the system, as well as guidelines to analyse its electrochemical signal.     

不同磁路电子回旋共振离子源引出实验

空间推进所用的电子回旋共振离子源(ECRIS)应具有体积小、效率高的特点. 本文研究的ECRIS使用永磁体环产生磁场, 有效减小了体积, 该离子源利用微波在磁场中加热电子, 电子与中性气体发生电离碰撞产生等离子体. 磁场在微波加热电子的过程中起关键作用, 同时影响离子源内等离子体的约束和输运. 通过比较四种磁路结构离子源的离子电流引出特性来研究磁场对10 cm ECRIS性能的影响. 实验发现: 在使用氩气的条件下, 特定结构的离子源可引出160 mA的离子电流, 最高推进剂利用率达60%, 最小放电损耗为120 W·A^-1; 所有离子源均存在多个工作状态, 工作状态在微波功率、气体流量、引出电压变化时会发生突变. 离子源发生状态突变时的微波功率、气体流量的大小与离子源内磁体的位置有关. 通过比较不同离子源的引出离子束流、放电损耗、气体利用率、工作稳定性的差异, 归纳了磁场结构对此种ECRIS引出特性的影响规律, 分析了其中的机理. 实验结果表明: 保持输入微波功率、气体流量、引出电压不变时, 增大共振区的范围、减小共振区到栅极的距离, 离子源能引出更大的离子电流; 减小共振区到微波功率入口、气体入口的距离能降低维持离子源高状态所需的最小微波功率和最小气体流量, 提高气体利用率, 但会导致放电损耗增大. 研究结果有助于深化对此类离子源工作过程的认识, 为其设计和性能优化提供参考.     

Acceleration and mitigation of carrier‐induced degradation in p‐type multi‐crystalline silicon

Recently, a new carrier‐induced defect has been reported in multi‐crystalline silicon (mc‐Si), and has been shown to be particularly detrimental to the performance of passivated emitter and rear contact (PERC) cells. Under normal conditions, this defect can take years to fully form. This Letter reports on the accelerated formation and subsequent passivation of this carrier‐induced defect through the use of high illumination intensity and elevated temperatures resulting in passivation within minutes. The process was tested on industrial mc‐Si PERC solar cells, where degradation after a 100 hour stability test was suppressed to only 0.1% absolute compared to 2.1% for non‐treated cells. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Novel microwave plasma‐assisted CVD reactor for diamond delta doping

We report on building a novel chemical vapor deposition (CVD) reactor for diamond delta‐doping. The main features of our reactor are: a) the use of rapid gas switching system, (b) the reactor design providing the laminar gas flow. These features provide the creation of ultra‐sharp interfaces between doped and undoped material and minimize the prolonged ”tails” formation in the doping profile. It is proved by optical emission spectroscopy that gas switching time is not more than 10 seconds. Using the novel reactor we have grown the nanometer‐thin layers of boron doped diamond. The FWHM of boron concentration profile is about 2 nm which is proved by SIMS. It is shown that the both single delta‐layer and multiple delta‐layers could be grown using the novel CVD reactor. In principle, the reactor could be used for diamond delta doping with other dopants, like nitrogen, phosphorus etc. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Spin and orbital magnetic moments and spin anisotropy energies of light rare earth atoms embedded in graphene: A first-principles study

The geometries, electronic structures, spin magnetic moments (SMMs), orbital magnetic moments (OMMs) and spin anisotropy energies (SAEs) of light rare earth atoms (La, Ce, Pr, Nd, Pm, Sm, Eu, and Gd) embedded in graphene were studied by using first-principles calculations based on Density Functional Theory (DFT). The spin-orbital coupling effect was taken into account and GGA+U method was adopted to describe the strongly localized and correlated 4f electrons. There is a significant deformation of the graphene plane after doping and optimization. The deformation of Gd doped graphene is the largest, while Eu the smallest. The results show that the valence is +3 for La, Ce, Pr, Nd, Pm, Sm and Gd, and +2 for Eu. Except Eu and Gd, there are obvious OMMs. When the spin is in the Z direction, the OMMs are −0.941 μ_B, −1.663 μ_B, −3.239 μ_B, −3.276 μ_B and −3.337 μ_B for Ce, Pr, Nd, Pm and Sm, respectively, and point the opposite direction of SMMs. All the doped systems except Gd show considerable SAEs. For Ce, Pr, Nd, Pm, Sm, and Eu, the SAEs are −0.928 meV, 20.941 meV, −8.848 meV, 7.855 meV, 75.070 meV and 0.810 meV, respectively. When the spin orientation is different, different orbital angular moments lead to apparent charge density difference of the 4f atoms, which can also explain the origin of SAEs.